It is a solvent-based, high-strength adhesive based on polyurethane, which is used in many industries, especially in the footwear industry, and is used to bond all types of UP, PVC, ABS, and fabric. Also, with the help of the company’s special primers, this adhesive gives extraordinary adhesive strength to various types of rubber, thermoplastic and ethyl vinyl acetate or puff sponges.
Automotive shoe and leather industry, car flooring, floor coverings and …
The desired surfaces must be dry and free of any dust and grease. Using a brush, paint the surfaces evenly
Glue them, then heat them up to 5 to 10 degrees Celsius after 5 to 10 minutes, glue them together and pressurize.
Give. If the surfaces have pores (perforated surfaces), it is better to soak them twice at a distance of 2 minutes.
This adhesive is a partial and does not require a deodorant, but if necessary to increase the tensile strength and thermal resistance.
Desmoder can be used. It is best to keep the ambient temperature above15
Solvent-based adhesives are flammable and somewhat toxic, so it is important to follow these tips when using them:
Keep the glue out of the reach of children.
Do not use glue near flames or sparks. (Avoid smoking and creating static electricity).
Use the glue in a well-ventilated area and then close the adhesive completely in the container.
Avoid direct contact of the adhesive with the skin and inhalation of its vapors.
Protect from freezing. Consume at temperatures below 40 degrees.
|Properties||standard||the amount of|
|Appearance||Uniform colorless viscose liquid|
|viscosity (p)||Brookfield RV , 25 °C||3000-3600|